Difference between revisions of "Latvia"

From Camopedia
Jump to navigation Jump to search
 
(9 intermediate revisions by the same user not shown)
Line 22: Line 22:
 
== Latvian Camouflage Patterns ==
 
== Latvian Camouflage Patterns ==
  
* The earliest Latvian camouflage patterns trace their lineage to the Soviet tricolor TTsKO design, although the shapes incorporated into the patterns are entirely distinctive. The early camouflage design shown here, a pattern of dark and light brown shapes on a khaki or light olive green background, was originally worn by the Latvian Army, and later by the Border Guards. Several color variations have been documented. This pattern dates to the early 1990s.
+
* The earliest Latvian camouflage patterns trace their lineage to the Soviet tricolor TTsKO design, although the shapes incorporated into the patterns are entirely distinctive. The early camouflage design shown here, a pattern of dark and light brown shapes on a khaki or light olive green background, was originally worn by the Latvian National Guard ''(Zemessardze)'', and later by the Army and Border Guards. Several color variations have been documented. This pattern dates to the early 1990s.
  
 
[[File:Latvia4.jpg|200px]]
 
[[File:Latvia4.jpg|200px]]
 
[[File:Latvia9.jpg|200px]]
 
[[File:Latvia9.jpg|200px]]
  
* Another early pattern of approximately the same vintage - using different drawings and a lighter, almost desert, colorway - incorporates dark brown and ochre amoebic shapes on a tan background. There is documentation this pattern was worn by Latvian Border Guards, but it may also have seen use with the Army and Ministry of the Interior.
+
* Another early pattern of approximately the same vintage - using different drawings and a lighter, almost desert, colorway - incorporates dark brown and ochre amoebic shapes on a tan background. This design was also worn by the early Latvian National Guard, as well as the Latvian Border Guards; it may also have seen early use with the Army and Ministry of the Interior.
  
 
[[File:Latvia3.jpg|200px]]
 
[[File:Latvia3.jpg|200px]]
Line 35: Line 35:
 
[[File:Latvia7.jpg|200px]]
 
[[File:Latvia7.jpg|200px]]
  
* The design seen below is of unconfirmed origins, but is believed to have been developed for Latvia around the time of its independence from the Soviet Union. Probably produced in a Russian or Ukrainian factory, black and white photographs from the period confirm the general shapes of this pattern were in use by Latvia during the 1990s. At least two color variations have been observed, however, and no verification has yet emerged as to which Latvian units may have used either one.  
+
* Utilizing identical shapes to early TTsKO Estonian "beach" designs, the pattern seen here was apparently worn by some Latvian National Guard ''(Zemessardze)'' units in the early stages of the newly formed defence force. The pattern consists of mauve and olive green shapes on a khaki background, and may have been printed in Ukraine.
 +
 
 +
[[File:Latvia14.jpg|200px]]
 +
 
 +
* The design seen below is of Ukrainian origins, and is believed to have been developed for Latvia (or considered for adoption) around the time of its independence from the Soviet Union. Several black and white photographs from the period confirm the general shapes of this pattern were in use by Latvia, with the earliest documented uniform having OTK stamps and a manufacturer's label dated 1991 . At least two color variations have been observed, although no verification has yet emerged as to which Latvian units may have used either one.  
  
 
[[File:Latvia11.jpg|200px]]
 
[[File:Latvia11.jpg|200px]]
  
* The design seen here, apparently worn in the 1990s by the Ministry of the Interior, bears a striking color resemblance to the current [[Lithuania|Lithuanian]] M05 pattern, yet the two are distinctive.
+
* The design seen here, adopted in the 1990s by the units of the Latvian Ministry of the Interior, may have been developed for commercial production by the Finnish company Sasta and later obtained through government or private channels. Although the color scheme bears a striking resemblance to the [[Lithuania|Lithuanian]] M05 pattern, the two designs are distinctive and not related as far as can be seen. It is worth noting that some uniforms appear to have the shapes oriented horizontally, while on other uniforms the orientation is vertical.  
  
 +
[[File:Latvia15.jpg|200px]]
 
[[File:Latvia1.jpg|200px]]
 
[[File:Latvia1.jpg|200px]]
  
* A modified variation, supposedly for "autumn" wear, is seen here. Although examples of uniforms exist, as yet no photographic evidence has emerged of MOI personnel wearing them, so the pattern may have only been experimental or limited-issue. It is interesting to note on the uniform example this photograph was taken from, the pattern is orientated at a 90 degree angle from the above version.
+
* A modified variation of the MOI pattern, reputedly intended for "autumn" wear, is seen here. Although examples of uniforms exist, as yet no photographic evidence has emerged of Latvian MOI personnel wearing them, so the pattern may have only been experimental or limited-issue.  
  
 
[[File:Latvia10.jpg|200px]]
 
[[File:Latvia10.jpg|200px]]
Line 55: Line 60:
 
[[File:Latvia6.jpg|200px]]
 
[[File:Latvia6.jpg|200px]]
  
* Introduced in 2006, this pixelated pattern was designed by [[Barracuda]] of Sweden. It is known simply as the NBS pattern, for ''Nacionālie Bruņotie Spēki,'' or National Armed Forces. The design incorporates large black & brown squares on a tan background.
+
* Introduced in 2006/7, this pixelated pattern was designed by [[Barracuda]] of Sweden. It is known simply as the NBS pattern, for ''Nacionālie Bruņotie Spēki,'' or National Armed Forces, although in common parlance it is usually referred to as LATPAT. The design incorporates large dark grey (nearly black), medium brown and khaki squares on a sandy background.
  
 
[[File:Latvia8.jpg|200px]]
 
[[File:Latvia8.jpg|200px]]
 +
 +
* Although in development since 2011, it was announced late in 2015 that the Latvian Armed Forces would adopt a variation of the LATPAT design utilizing and improved color palette for use in summer and on foreign deployments to warmer climates. This version of the design, based on the same drawings as standard LATPAT, incorporates light and dark grey (nearly black), medium brown, khaki and foliage green squares. Known in common parlance as Multi-LATPAT, the design will be officially introduced into the supply system in 2016, with full implementation planned by 2018. The LATPAT design will continue to be issued as a winter uniform, alongside the new uniform.
 +
 +
[[File:Latvia12.jpg|200px]]
 +
 +
* In April 2020, the National Armed Forces announced it would be adopted a completely new camouflage design. Named "WoodLatpat," the pattern was developed by a team of five scientist/developers from the National Guard Science, Research and Innovation Implementation Center beginning in 2019, and incorporates fractal graphic technology in order to create a camouflage design highly suited to native Latvian geography. The resulting camouflage design, consisting of irregular rhombus and triangular shapes in various tones of green, brown, and khaki, is reputedly designed to defeat NIR night vision equipment as well as current optoelectronic surveillance technologies.
 +
 +
[[File:Latvia13.jpg|200px]]
 +
[[File:Latvia13b.jpg|200px]]
  
 
== Other Camouflage Patterns Worn by Latvia ==
 
== Other Camouflage Patterns Worn by Latvia ==

Latest revision as of 12:40, 23 August 2020

Camopedia23.jpg

latvia.gif

Republic of Latvia

Latvia was known as the Latvian Soviet Socialist Republic (Latvijas Padomju Sociālistiskā Republika) between 1940 and 1991. While part of the Soviet Union, the nation's Armed Forces were under the administration of the USSR. Since achieving its independence in 1991 and subsequent membership in NATO, the armed forces of Latvia have taken great measures to distinguish themselves from their Soviet predecessors. Early Latvian camouflage patterns, although influenced by those of the Soviet Union, are nevertheless distinctive enough to warrant separate categorization of their own. The nation is today known as the Republic of Latvia (Latvijas Republika).

Latvian Camouflage Patterns

  • The earliest Latvian camouflage patterns trace their lineage to the Soviet tricolor TTsKO design, although the shapes incorporated into the patterns are entirely distinctive. The early camouflage design shown here, a pattern of dark and light brown shapes on a khaki or light olive green background, was originally worn by the Latvian National Guard (Zemessardze), and later by the Army and Border Guards. Several color variations have been documented. This pattern dates to the early 1990s.

Latvia4.jpg Latvia9.jpg

  • Another early pattern of approximately the same vintage - using different drawings and a lighter, almost desert, colorway - incorporates dark brown and ochre amoebic shapes on a tan background. This design was also worn by the early Latvian National Guard, as well as the Latvian Border Guards; it may also have seen early use with the Army and Ministry of the Interior.

Latvia3.jpg

  • A third variation of the basic tricolor design incorporated dark blue and blue grey shapes on a medium blue background, and was probably worn by the Police Forces of the Ministry of the Interior.

Latvia7.jpg

  • Utilizing identical shapes to early TTsKO Estonian "beach" designs, the pattern seen here was apparently worn by some Latvian National Guard (Zemessardze) units in the early stages of the newly formed defence force. The pattern consists of mauve and olive green shapes on a khaki background, and may have been printed in Ukraine.

Latvia14.jpg

  • The design seen below is of Ukrainian origins, and is believed to have been developed for Latvia (or considered for adoption) around the time of its independence from the Soviet Union. Several black and white photographs from the period confirm the general shapes of this pattern were in use by Latvia, with the earliest documented uniform having OTK stamps and a manufacturer's label dated 1991 . At least two color variations have been observed, although no verification has yet emerged as to which Latvian units may have used either one.

Latvia11.jpg

  • The design seen here, adopted in the 1990s by the units of the Latvian Ministry of the Interior, may have been developed for commercial production by the Finnish company Sasta and later obtained through government or private channels. Although the color scheme bears a striking resemblance to the Lithuanian M05 pattern, the two designs are distinctive and not related as far as can be seen. It is worth noting that some uniforms appear to have the shapes oriented horizontally, while on other uniforms the orientation is vertical.

Latvia15.jpg Latvia1.jpg

  • A modified variation of the MOI pattern, reputedly intended for "autumn" wear, is seen here. Although examples of uniforms exist, as yet no photographic evidence has emerged of Latvian MOI personnel wearing them, so the pattern may have only been experimental or limited-issue.

Latvia10.jpg

  • Latvia had introduced the US m81 woodland pattern around 1992 for use by its special operations forces. In the late part of the 1990s, the Lithuanian Armed Forces discarded all previously used camouflage patterns and fully integrated a locally-produced copy of the US m81 woodland design, possibly as part of its bid to become a member of NATO. This pattern remained in service intil approximately 2008.

Latvia5.jpg

  • Circa 2004, a Latvian desert camouflage pattern was introduced. Although incorporating the same basic colorway as the US tricolor desert pattern, the drawings are unique and bear no relationship to the American design. This pattern was worn by Latvian personnel deployed to Afghanistan (ISAF), but has since been replaced by the NBS pattern.

Latvia6.jpg

  • Introduced in 2006/7, this pixelated pattern was designed by Barracuda of Sweden. It is known simply as the NBS pattern, for Nacionālie Bruņotie Spēki, or National Armed Forces, although in common parlance it is usually referred to as LATPAT. The design incorporates large dark grey (nearly black), medium brown and khaki squares on a sandy background.

Latvia8.jpg

  • Although in development since 2011, it was announced late in 2015 that the Latvian Armed Forces would adopt a variation of the LATPAT design utilizing and improved color palette for use in summer and on foreign deployments to warmer climates. This version of the design, based on the same drawings as standard LATPAT, incorporates light and dark grey (nearly black), medium brown, khaki and foliage green squares. Known in common parlance as Multi-LATPAT, the design will be officially introduced into the supply system in 2016, with full implementation planned by 2018. The LATPAT design will continue to be issued as a winter uniform, alongside the new uniform.

Latvia12.jpg

  • In April 2020, the National Armed Forces announced it would be adopted a completely new camouflage design. Named "WoodLatpat," the pattern was developed by a team of five scientist/developers from the National Guard Science, Research and Innovation Implementation Center beginning in 2019, and incorporates fractal graphic technology in order to create a camouflage design highly suited to native Latvian geography. The resulting camouflage design, consisting of irregular rhombus and triangular shapes in various tones of green, brown, and khaki, is reputedly designed to defeat NIR night vision equipment as well as current optoelectronic surveillance technologies.

Latvia13.jpg Latvia13b.jpg

Other Camouflage Patterns Worn by Latvia

  • The Latvian contingent to Bosnia (SFOR) in 1996 was clothed in surplus Swedish M90 "splinter" pattern camouflage uniforms.

Sweden4.jpg

  • The Latvian contingent to Bosnia (SFOR) in 1998 was clothed in surplus Danish M84 pattern camouflage uniforms.

Denmark m84 pattern.jpg

Photos of Latvian Soldiers

  • Latvian soldiers wearing the early pattern

Latvia2.jpg